MIT Cables introduces The Heritage Series 2017

News
Categories:
Loudspeaker cables,
Interconnects,
Digital cables
MIT Cables introduces The Heritage Series 2017

The following is a press release issued by MIT Cables.

April 14, 2017 - Rocklin California, Music Interface technologies - The challenge: Two years ago another manufacturer from High End Audio suggested to Bruce Brisson C.E.O MIT Cables, “The industry needs a great sounding $10k Speaker Cable without switches or exotic enclosure materials and finishes”. Further, he challenged Bruce to deliver $30k in performance for $10k at the point of sale. He took the challenge. High on Bruce’s list was to maintain the lineage of the “Heritage sound” combined with the “Heritage look.”

 
This feat would require extreme cuts in parts, labor and materials. Machined aluminum enclosures were eliminated and switching options removed. While his circuit topologies remained similar or the same, capacitor and inductor sizes were reduced by using more "through hole" technology along with printed circuit boards.
 
To put it simply; Bruce took Oracle and Matrix topologies, used smaller capacitors and inductors and ‘stuffed’ them into the original Shotgun and Magnum (AKA Heritage enclosures).
 
The Heritage MI-2C3D Series Level 1, 2, and 3 - The answer: The cable Bruce created to answer the challenge became the MI-2C3D Level 2. Complete 30K performance at a 10K price point. Challenge met. Not one to quit there, Bruce continued to “bracket” this design with another offering even better performance and one with a little less technology, offered at an even lower price point. These interfaces are the new MIT MI-2C3D Series and available at three levels and three price points; Level 1, Level 2 and Level 3.
 
Along with each MI-2C3D Speaker interface is an Oracle and Matrix interconnect built to the same criteria; eliminate the machined billet enclosures and hand made parts ordinarily used to create the unique MIT Oracle sound.
 
The Heritage EVO Series One, Two, and Three - The Evolution of performance interfaces below $4K: Over the last 30 years MIT introduced many successful products. MIT assembled a large and devoted following based on Shotgun and Magnum technologies and excellent reviews published by the absolute sound “Music Interface Technologies AVt1” 6 moons.com  “MIT Cables Shotgun S1 Loom” , and Stereophile recommended components “MIT CVT Terminator 2”.
 
After completion of the 2C3D project, Bruce decided to look into keeping these three special models alive by enhancing them with improved parts and miniaturizing techniques used inside other Heritage enclosures. This would allow Brisson to resurrect and perpetuate these “Evolutionary” designs as the EVO One, EVO Two and EVO Three models. Bruce considers this additional project to be MIT’s "homage" to these highly regarded products and reviews. With the inclusion of three EVO versions, MIT will introduce the complete Heritage Series for 2017.
 
Retail prices will start at ~$1,000.00 for EVO 3 speaker cables ascending to ~$16,500.00 for the top tier 2C3D Level 1 covering the entire spread with only 6 levels. This makes it possible for any dealer or distributor to offer a focused series of reference level products with the linage of a thoroughbred, at pedestrian prices.
 
Over the past three decades and through to 2017, the technology used in these speaker interfaces and interconnects have received multiple industry awards including; Product of the Year, Editor’s Choice, Blue Moon, Best Sound, Best of Show, and many more.

MIT Cables® is a registered trademark. MIT Cables are designed and manufactured by CVTL Inc., 4130 Citrus Ave, Rocklin Ca. 95677  (916) 625-012
http://www.mitcables.com/products/the-heritage-series.html

Featured Articles

Lists